生产耐火浇注料用棕刚玉原料 325目细粉刚玉
生产耐火浇注料用棕刚玉原料 325目细粉刚玉[详细参数]
库存数量: 227
产品规格: 按合同
产品价格: 3380.00元/吨
发货地点: 按合同
运费说明: 买家承担
生产耐火浇注料用棕刚玉原料 325目细粉刚玉[详细内容]
&&&生产耐火浇注料用棕刚玉原料 325目细粉刚玉&&&&& & & 巩义市巨丰磨料抛光厂棕刚玉俗称金刚砂，是以优质铝矾土、无烟煤、铁屑为主要原料，在电弧炉内经2000℃高温冶炼制成，经磨机、粉碎、整形、磁选去铁、筛分成多种粒度，外观呈棕褐色，韧性好，显微硬度Kg/mm2，体积密度&3.85g/cm3，耐高温、耐火度高达1850℃，可做耐火材料，也可用作磨料。&& & & 巩义市巨丰磨料抛光厂棕刚玉具有纯度高，质地致密，堆积密度大，自锐性强，韧性好，磁性物含量特低的特点，用其制成的磨具磨削锋利，发热率低，磨削比高，且使用时沾附少，制成的烧结磨具具有烧成后颜色深蓝，不起网状裂纹的特色，用于制造陶瓷、树脂高固结磨具、研磨抛光等。&& & & 巩义市巨丰磨料抛光厂棕刚玉微粉是用做研磨、抛光以及制作涂附磨具、高级耐火材料、精密铸造型壳材料优质的配砂。&&产品名称规格型号主要指标密度外观包装AL203Fe2O3SiO2&&棕刚玉一级&&95&0.3&1.53.85棕红色颗粒25KG/袋次一级&90&1.3&1.53.85黑色颗粒灰色粉状25KG/袋二级&85&1.8&1.53.85黑色颗粒灰色粉状25KG/袋次二级&80&2.3&1.53.85黑色颗粒灰色粉状25KG/袋&70&4.3&1.53.85黑色颗粒灰色粉状25KG/袋&&& & & 一级棕刚玉：呈现棕红色、黑色颗粒状，主要用于精密铸造、耐磨材料，对磨料要求较高的行业，比如砂轮制造精抛，棕刚玉砂轮是磨削加工中最主要的一类磨具。砂轮是在磨料中加入结合剂，经压坯、干燥和焙烧而制成的多孔体。由于磨料、结合剂及制造工艺不同，砂轮的特性差别很大，因此对磨削的加工质量、生产率和经济性有着重要影响。砂轮的特性主要是由磨料、力度、结合剂、硬度、组织、形状和尺寸等因素决定砂轮种类繁多。&& & & 二级棕刚玉：黑色颗粒状，主要用于喷砂、抛光、研磨、防腐除锈、石材雕刻、纱布材料、切割片等。比如工件表面的清理、工件表面涂覆前的前处理、改变工件的物理机械性能、工件表面的光饰加工。&& & & 棕刚玉：黑色颗粒灰色粉状，可适用于各种地面所需地坪砂。比如飞机场跑道、操场、以及工厂用耐磨地坪。&棕刚玉的生产种类：&&& & & 1、高温煅烧磨料是在原棕刚玉生产过程中进行高温煅烧，然后再进行焖火处理。其主要特点为：膨胀系数非常小、亲水性极好、韧性极高、强度大、制成的烧结磨具具有烧成后颜色深蓝、不起网状裂纹、无锈斑的特点，因此提高了磨具加工时的精度和磨削效果，尤其适应生产高档固结磨具。&&&& & & 2、中温煅烧磨料是在原棕刚玉生产过程中进行中温煅烧，然后再进行焖火处理。其主要特点为：膨胀系数小、亲水性好、韧性高、强度大、制成的烧结磨具具有烧成后颜色深蓝、不起网状裂纹、无锈斑的特点，因此提高了磨具加工时的精度和磨削效果，尤其适应生产高档固结磨具。&&& & & 3、棕刚玉巴马克砂是通过巴马克生产线加工处理而成，具有堆积密度高，纯度高，质地致密，自锐性强，韧性好，磁性物含量特低的特点，用其制成的磨具磨削锋利，发热率低，磨削比高，且使用时沾附少；制成的烧结磨具具有烧成后颜色深蓝、不起网状裂纹、无锈斑的特点，水洗后，把粉尘降到，适用于制造陶瓷、树脂高固结磨具以及研磨、抛光等。&&& & & 4、棕刚玉球磨整形砂是通过球磨机生产线加工处理而成，堆积密度比巴马克砂低，棕刚玉球磨整形砂的特点是纯度高，自锐性强，韧性好，磁性物含量特低，用其制成的磨具磨削锋利，发热率低，磨削比高，且使用时沾附少；制成的烧结磨具具有烧成后颜色深蓝、不起网状裂纹、无锈斑的特点，水洗后，粉尘特低，适用于制造陶瓷、树脂高固结磨具以及研磨、抛光等。&&& & & 5、棕刚玉对辊砂是通过对辊机生产线加工处理而成，堆积密度比球磨整形砂低，但纯度高，自锐性强，韧性好，磁性物含量特低，用其制成的磨具磨削锋利，发热率低，磨削比高，且使用时沾附少；制成的烧结磨具具有烧成后颜色深蓝、不起网状裂纹、无锈斑的特点，适用于制造陶瓷、树脂高固结磨具以及研磨、抛光等。&&& & & 棕刚玉每袋净重25公斤白色编织袋包装。运输储存期间防止包装破损，以免漏失或混入杂物．不宜与承托料及其他滤料一起运输堆放。&&Gongyi city choice brown corundum, commonly known as carborundum abrasive polishing factory, is the high quality bauxite, anthracite coal, scrap iron as the main raw material, made in the Canon of 2000 ℃ high temperature smelting electric arc furnace, the mill, crushing, plastic, magnetic separation to iron, the screen is divided into a variety of particle size, appearance is tan, good toughness and microhardness,
kg/was, acuity 3.85 g/cm3 volume density, high temperature resistance and refractoriness is as high as 1850 ℃, can be used as refractory material, also can be used as an abrasive.&Gongyi city choice brown fused alumina abrasive polishing factory has high purity, dense texture, bulk density is big, the sharpness is strong, good toughness and the characteristics of the content, low magnetic material, made of its sharp abrasive grinding, low heating rate, high grinding ratio, and when using cleave, made of sintered abrasive has burnt after dark blue color, not reticulate crack characteristic, used in the manufacture of ceramics, resin high consolidation abrasive, grinding and polishing, etc.&Gongyi city choice abrasive polishing factory brown fused alumina powder is used for grinding, polishing and coated with abrasive, high-grade refractory materials, precision cast molding shell material quality with sand.&The physical and chemical indicators：&Theproduct namespecifications&Main indicatorsThedensity ofappearancepackagingAL203Fe2O3SiO2&&Brown fused aluminaLevel 1&&95&0.3&1.53.85Palm red particles25 kg/bagSecond level&90&1.3&1.53.85Black particlesgraypowder25 kg/bagThesecondary&85&1.8&1.53.85Black particlesgraypowder25 kg/bagA secondary&80&2.3&1.53.85Black particlesgraypowder25 kg/bagLevel 3&70&4.3&1.53.85Black particlesgraypowder25 kg/bag&Primary corundum: palm red, black, granular, is mainly used for precision casting, wear-resisting material, the higher requirements for abrasive industry, such as grinding wheel manufacturing fine buffing, brown corundum grinding wheel in grinding is the main type of grinding tool. In abrasive grinding wheel is to join the binder, the compact, drying, and roasting, made of a porous body. Because of the different abrasive, binder and manufacturing technology, the characteristics of the grinding wheel difference is very big, so the quality of grinding machining, productivity and economy has an important influence. The characteristics of the grinding wheel is dominated by abrasive, strength, binders, hardness, organization, there are many different kinds of shape and size and other factors determine grinding wheel.&Secondary corundum: black granule, mainly used for sanding, polishing, grinding, anti-corrosion derusting, stone carving, gauze materials, cut pieces, etc. Such as cleaning, surface coating on the surface of the workpiece before processing, change the physical and mechanical properties of the workpiece, workpiece surface finishing processing.&Level 3 corundum: black particles gray powder, can be applied to all kinds of ground floor sand required. Such as airport runways, playground, and factory use wear-resisting flooring.&Brown fused alumina production process:&1, high temperature calcination abrasive is in the original brown fused alumina production process of high temperature calcination, braised fire processing then. Its main characteristic is: very small expansion coefficient, excellent hydrophilicity, high toughness, strength, made of sintered abrasive has burnt after the color is dark blue, not the characteristics of the reticular crack, no rusty spot, thus enhances the precision of the abrasive machining and grinding effect, especially to adapt to the production of high-grade consolidation.&2, medium temperature calcining abrasive is in the original brown fused alumina production process for temperature of calcination, braised fire processing then. Its main features are: small expansion coefficient, good hydrophilicity, high toughness, strength, made of sintered abrasive has burnt after the color is dark blue, not the characteristics of the reticular crack, no rusty spot, thus enhances the precision of the abrasive machining and grinding effect, especially to adapt to the production of high-grade consolidation.&3 mark, mark brown corundum sand is through the production process, with high packing density, high purity, dense texture, the sharpness is strong, good toughness and the characteristics of the content, low magnetic material, made of its sharp abrasive grinding, low heating rate, high grinding ratio, and wh Made of sintered abrasive has burnt after the color is dark blue, not the characteristics of the reticular crack, no rusty spot, after washing, to minimize dust, high consolidation is suitable for making ceramic, resin abrasive and grinding, polishing, etc.&4, brown corundum ball mill plastic sand through the ball mill production line processing, bulk density is lower than the mark sand, corundum ball mill plastic sand is characteristic of high purity, since the sharpness is strong, good toughness, low content of magnetic material, made of its sharp abrasive grinding, low heating rate, high grinding ratio, and wh Made of sintered abrasive has burnt after the color is dark blue, not the characteristics of the reticular crack, no rusty spot, after washing, dust, low, high consolidation is suitable for making ceramic, resin abrasive and grinding, polishing, etc.&5, brown fused alumina is through the roller machine for roller sand production line processing, and packing density is lower than ball mill plastic sand, high purity, however, since the sharpness is strong, good toughness, low content of magnetic material, made of its sharp abrasive grinding, low heating rate, high grinding ratio, and wh Made of sintered abrasive has burnt after the color is dark blue, not reticulate crack, no rusty spot, the characteristics of high consolidation is suitable for making ceramic, resin abrasive and grinding, polishing, etc.&Brown fused alumina bags of 25 kg net each white woven bag packing. Stored during transport to prevent damaged packaging, in order to avoid leakage or mixed with sundry. Should not be stacked together with the supporting and other filter material transportation.&Gongyi city choice abrasive polishing factoryAddress: henan gongyi city The small town of longmen village three groupsContact: li budPhone: QQ: E-mail:
@qq.comWebsite:&巩义市巨丰磨料抛光厂厂址：河南巩义市小关镇龙门村三组联系人：李花蕾手机：QQ：邮箱：网址：1、产品货源：厂家直销，100%正品，保证质量。2、关于图片：所有产品图片均为实拍，由于客观原因，部分粒度无法全部发布，具体粒度要求可咨询客服。3、客服在线时间：上午：8:00-12:00 下午：1:30-5:30（冬天） 2:00-6:00（夏天）4、关于发货：签订销售合同后两天内发货，发货量大时或与特殊情况时双方协调决定。5、关于运输：25公斤内样品可按客户要求快递发货，5吨以下走物流，6吨以上走配货车，货量大可安排整车发货。巩义市巨丰磨料抛光厂厂址：河南巩义市小关镇龙门村三组联系人：李花蕾&手机：QQ：邮箱：网址：
供应商简介
西安于佳美容美发学校,美容美发.
我公司是一家私营企业，本着教育为本的经营理念，竭诚在商务服务行业中为您服务。我公司经过多年经营，成功打造于佳品牌，具备包教包会，随到随学，师资力量雄厚，有专业老师在前指导培训，安排就业实习的优势，形成了包教包会，随到随学，师资力量雄厚，有专业老师在前指导培训，安排就业实习的特点。我西安于佳美容美发学校，主要面向全国等领域的市场。注册时间2004年，注册资金100万，现有员工50多人。我们郑重声明：
供应详情价格
相关产品推荐
其它产品推荐
内容声明：勤加缘网为第三方互联网信息服务提供者，勤加缘网（含网站、客户端等）所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布，其真实性、准确性和合法性均由店铺经营者负责。勤加缘提醒您购买商品/服务前注意谨慎核实，如您对商品/服务的标题、价格、详情等任何信息有任何疑问的，请在购买前通过QQ和电话与店铺经营者沟通确认；勤加缘网存在海量店铺，如您发现店铺内有任何违法/侵权信息，请立即向勤加缘举报并提供有效线索。本页面提供有关的供应详情信息，您是想采购？可以直接联系供应商哦。浇注料用棕刚玉
【产品规格】：0-1mm 1-3mm 3-5mm 5-8mm 100#-0 200#-0 320#-0
【生产能力】：5万吨
【应用范围】：适用做浇注料
【产品介绍】：
&棕刚玉是以优质磨料级矾土为原料，配以辅料，于电弧炉中经2250℃以上高温精炼制成，耐火度在1850℃以上。我公司生产的棕刚玉具有纯度高，结晶好，流动性强，线膨胀系数低，耐腐蚀的特点。该产品在应用过程中具有不起爆、不粉化、不开裂的特点。棕刚玉是以优质磨料级矾土为原料…
棕刚玉是以优质磨料级矾土为原料，配以辅料，于电弧炉中经2250℃以上高温精炼制成，耐火度在1850℃以上。
&我公司生产的棕刚玉具有纯度高，结晶好，流动性强，线膨胀系数低，耐腐蚀的特点。该产品在应用过程中具有不起爆、不粉化、不开裂的特点。刚玉砂原料原料均来自于公司自主生产的优质刚玉块，在原料上具备很大的质量优势和市场优势，公司制砂设备齐全，所以生产出的产品不是单一产品，具备生产段砂、号砂等不同规格的刚玉砂，无论在物理指标和化学指标上都可以满足不同客户的不同需求。
我公司生产的刚玉原料均来自于公司自主生产的优质刚玉块，在原料上具备很大的质量优势和市场优势，公司制砂设备齐全，所以生产出的产品不是单一产品，具备生产段砂、号砂等不同规格的刚玉砂，无论在物理指标和化学指标上都可以满足不同客户的不同需求。
棕刚玉是以优质磨料级矾土为原料，配以辅料，于电弧炉中经2250℃以上高温精炼制成，耐火度在1850℃以上。
物理指标 Physical Properties
True Density
Mohs Hadness
Melting Temperature
Crystal System
Refractory Temperature
Trigonal system
Specification
主要化学成分（%）
Chemical composition（%）
磁性物（%）
Magnetic material content（%）
For refractory
_______________
_______________
Fine powder
_______________
Copyright@
POWERED BY 山西省平陆县晋纲新型耐火材料有限公司 All RIGHTS RESERVED